Learn To Create A Ribbon Style Header

Learn To Create A Ribbon Style Header

What We’ll Be Creating

Quick & Easy Ribbon Header

Resources Used In This Tutorial

Starting With The Pen Tool

Create a new document (Ctrl + N) 1000 x 450 pixels, before we start let me just explain about the ribbon. The ribbon will be in 3 parts, you will first have the end of the ribbon, the fold then the main part.

Quick & Easy Ribbon Header

Select the “Pen Tool” (P) with the following settings.

Quick & Easy Ribbon Header

Now with the pen tool start to draw the left side of the ribbon edge (1), the edge should have curvy frilly edges.

Quick & Easy Ribbon Header

Quick & Easy Ribbon Header

Still with the “Pen Tool” (P) begin to draw shape 3 which is the main part of the ribbon. Towards the right side of the ribbon (The Main Part) make sure the path lines are straight as this will make it easier when we come to create the right side of the ribbon.

Quick Tip:

Holding down Shift key on the keyboard will give you a perfect straight vertical or horizontal line.

Quick & Easy Ribbon Header

Quick & Easy Ribbon Header

Again with the “Pen Toll” (P) begin to join the ribbon edge and main ribbon part together with a nice triangular shape.

Quick & Easy Ribbon Header

Quick & Easy Ribbon Header

You should now have 3 shapes which make up half of your ribbon all on 3 separate layers.

Making The Ribbon Complete

To make the ribbon complete all’s we have to do is duplicate and flip our layers, BUT before we do this we need to make our main ribbon part (shape 3) a little longer. Select the “Pen Tool” (P) and click he vector mask in the layers window, once you have selected the vector mask the shapes outline should be highlighted.

Quick & Easy Ribbon Header

Now hold down the CTRL key down on the keyboard and highlight all of the anchor points. Left click on the mouse while dragging and you should see a a marquee style type box appear. The image below indicates all anchor points are selected.

Quick & Easy Ribbon Header

Now go to “Edit > Copy” (Ctrl + C), “Edit > Paste” (Ctrl + V) and finally “Edit > Free Transform Path” (Ctrl + T). We now have to flip the shape so go to “Edit > Transform > Flip Horizontally”, move the duplicated shape over until you have the length you require.

Quick & Easy Ribbon Header

Now duplicate the other 2 shapes which make up the ribbon and flip them horizontally. Finally move the shapes into place on the other side of the ribbon.

Quick & Easy Ribbon Header

Adding The Layer Styles

Add the following layer styles to the two ribbon end layers.

Quick & Easy Ribbon Header

Quick & Easy Ribbon Header

You should have something like this.

Quick & Easy Ribbon Header

To the ribbon fold layers add a gradient overlay using settings below.

Quick & Easy Ribbon Header

You should have something like this.

Quick & Easy Ribbon Header

Now, finally add the a gradient overlay to your main ribbon shape using the settings below.

Quick & Easy Ribbon Header

You should have something like this.

Quick & Easy Ribbon Header

Adding A Pattern To The Ribbon

Create a new (Ctrl + N) document 4×4 pixels, select the “Pencil Tool” (B) then simply replicate the image below.

Quick & Easy Ribbon Header

When your done go to “Edit > Define Pattern”, save the pattern then head back to your original canvas. Load a selection around on of the ribbon ends.

Quick Tip:

To load a selection simply click the little layer thumbnail whilst holding down the Ctrl key on the keyboard.

Quick & Easy Ribbon Header

With the selection loaded we now need to contract the selection. Contract the selection by 5px by going to “Select > Modify > Contract”. Select the “Fill Tool” (G) with your pattern which you created earlier.

Quick & Easy Ribbon Header

Fill (G) the selection with the pattern then go to “Select > Modify > Contract”, contract the selection by 5px again and hit the delete key. Finally add a white #ffffff color overlay to the pattern layer.

Quick & Easy Ribbon Header

Repeat these steps for each of the ribbon shapes apart from the fold shape.

Quick & Easy Ribbon Header

Adding Some Grunge

Download the grunge brushes from the resource list.

Add some random grunge to the middle part of the ribbon then set the layers opacity to about 43% and blend mode to soft light.

Quick & Easy Ribbon Header

The Finishing Touches

Load a selection around the either the left or right ribbon ends then select the “Gradient Tool” (G).

Quick Tip:

To load a selection simply click the little layer thumbnail whilst holding down the Ctrl key on the keyboard.

Quick & Easy Ribbon Header

Quick & Easy Ribbon Header

Drag the gradient from the end of the middle part of the ribbon outwards towards the end of the ribbon. Set the shadows opacity to around %40.

Quick & Easy Ribbon Header

Repeat the same steps for the other end of the ribbon. Once your done you can begin to add some of the header elements like navigation and title.

Quick & Easy Ribbon Header

Conclusion

Thanks for taking part in this tutorial, if you managed to finish this tutorial I’d love to see some of your results. Feel free to post them up on our Facebook Fan Page.

Quick & Easy Ribbon Header

Download Source

About the Author Wilma Hamlin

Wilma Hamlin is a creative designer & writer. She writes for Crayonify. Being a designer as well she use to create amazing designs using many tools. In her lesuire time she love to read books and tries to learn new designs.

Leave a Comment:

26 comments
EJ says

Nice and creative! I like your Tutorials

Reply
rajasegar says

Wow, cool ribbon, thanks Richard for sharing… my fingers are sore after a strenuous exercise especially with the Pen tool :)

Reply
Richard Carpenter says

Thank for your comments, much appreciated

Reply
Ecaz says

Amazing as always :D!

Reply
suki says

nice tuts…thanks for sharing :)

Reply
USA Free Driving Online Test says

Good tutorials thanks for sharing
Joe
http://www.ezdrivingtest.com (Free Online Portal to prepare for USA Driving written test)

Reply
saravana says

simple and superb !!! Thanks a lot

Reply
dilip says

THnx its good very good infact

Reply
shanthi says

nice tutl

Reply
تحميل says

naice .

cooooooooooool

Reply
Raj Mehta says

Nice tut

:)

Reply
Cheryl says

Used this technique for one of our customers. Nice touch! Keep the design tutorials going!

Reply
Van Nhut says

Thank you!

Reply
Adam says

tutorial was Awesome!. Thank a lot.

Reply
vector says

Nice tutorials and very useful vectors, i am very thanks such an beautiful vectors collections with their in depth explanation.i hope in future also u will add some more collections, i am really thanks your contribution towards world designers community.You can get Free Vectors Graphics Stuff http://www.vectorsgraphics.com and get more exposure to graphics world.

Sandy

Reply
nonStopCars says

Thanks for tutorial, it is very useful for beginners like us. But the result was not as expected, I was wrong in that section?

Reply
Yuri says

I’d like to share with you good idea for Join Now, Register or Subscribe buttons.
Here is little tutorial:
http://nokeywordinurl.com/creating-ribbon-style-button-with-photoshop-best-for-join-now-register-signs/

Reply
asdf says

Learnt so much from here.Thank you!

Reply
Designs Blessing says

Excellent Tutorial. I have learn few tricks through that tutorial. thanks for sharing it

Reply
AsgharSHAH says

Nice tutorial, thank you!

Reply
prasanna kumar.Gummalla says

This is the best tutorial i seen .Thank you

Reply
luthpitaaka says

What does it mean? –> To load a selection simply click the little layer thumbnail whilst holding down the Ctrl key on the keyboard. I’m still confuse ㅜㅜ

Reply
Richard Carpenter says

it loads a marquee selection around the element in the layer. The longer way of doing it would be to select the layer then go to “Edit > Load Selection”

Reply
rey says

good jobs bro, thank for share

Reply
KHOKON says

Wow! What a nice design, I love this. thanks for sharing.

Reply
Paul says

hi. stuck at one thing and cant carry on. When you contract first time by 5px, and then again contract by 5px and press delete button, the rest of my shape delettes, not that 5px of contraction that i need. What am i doing wrong ?

Reply
Add Your Reply

Popular posts

css.php